Login / Register |

Flashings

Here at Rhino Steel Cladding we specialise in the manufacture and supply of all types of barge board flashings.

All barge flashings are made in 3m lengths as standard and consist of a 90 degree angle at the centre of the flashing. There are 3 types of finish to our flashings- Plastisol PVC coated, polyester coated smooth finish and a standard galvanised finish. Our barge flashings are formed and profiled from a flat sheet 1200mm wide and 3m in length, from the same material as our roofing sheets. We currently stock a standard barge flashing with a girth of 400mm (200mm x 200mm), with one bend in the centre. These are suitable for all types of roof cladding and wall cladding systems.

Barge board flashings are used on the corners of any building, also for the gable ends of an apex roof. They can also be used to flash around a single sloping pitched roof. Their main purpose is to provide closure between sheets and walls, and also to provide protection against high winds lifting the sheets.

All standard colours available to match our range of roofing and wall cladding sheets.

We also manufacture special flashings to suit customer requirements from 50mm x 50mm to 600 x 600mm, with or without welted edges. Flashings can also be manufactured with a number of bends to suit any application.

Please call our friendly experienced sales team to discuss any special requirements you may have, all enquiries welcome.